Segway VILLIAN SSV Series - Install the Starter Motor; Remove the Starter Motor; Starting System

STARTING SYSTEM
3-3-5
B
B
B
B
A
A
Remove the starter motor
◆
Disconnect the connecting wire harness on the
starter motor and remove the two bolts
【
A
】
◆
Pull out the starter motor
【
B
】
and remove the
starter motor
Install the starter motor
◆
Check whether the O-ring
【
A
】
at the gear end
of the starter motor is intact, and apply a proper
amount of engine oil on the surface of the O-ring
◆
Align the starter motor
【
B
】
with the mounting hole
and insert
◆
Screw in two bolts
【
C
】
to fi x the starter motor
Bolt
【
C
】
9.8 N·m (1 kgf·m, 87 in•lb)
A
A
C
C
Starting system