14 - 32
ELECTRICAL SYSTEM
DISASSEMBLY OF POWER LOCK, START BUTTON, VARIOUS SWITCHES, ETC
【A】Power lock 【B】Gasket
【C】Power lock cover 【D】Start button
【E】Lock cover 【F】Secondary lock cover
【G】Limit card
1. When removing the power lock, hold the power lock 【A】 from the inside of the instrument panel,
and turn the power lock cover 【C】 counterclockwise with the other hand, and the power lock can be
removed after unscrewing;
2. When disassembling the start button, turn the secondary lock cover 【F】 counterclockwise from the
inside of the instrument panel, and the start button can be removed after unscrewing;
3. When disassembling the switch, use a suitable tool to pry the limit card 【G】 from above or below to
remove the switch;
Before disassembling the power lock, start button, various switches, etc., at least the plastic parts such
as the left lower cover of the instrument panel must be disassembled. For details, please refer to the
disassembly steps of plastic parts.
To Next Page
Loading...
