10 - 9
WHEELS AND TIRES
A
The replacement of the wheel
◆ Shake the wheel with both hands for excessive or
abnormal movement, check whether the hub bearing
is loose or damaged, if necessary, please replace
the hub bearing.
◆ Remove the wheel (see Wheel removal).
◆ Remove tire from rim (see Tire removal).
◆ Remove the valve mouth assembly and throw away.
【A】 Plastic cover
【B】 Spool
【C】 Stem seal
【D】 Stem
【E】 Seat
◆ Install new air valve on new rim.
◆ Remove bonnet, moisten stem with soap solution,
and pull stem 【A】from inside out through rim until
it gets stuck in place.
!
Do not use oil or petroleum distillate to moisten the stem
as it degrades rubber.
◆ Install the tire on the new rim (see Tire installation).
◆ Wheel mounting (please refer to wheel mounting)
To Next Page
Loading...
Need help?
General
