14 - 19
ELECTRICAL SYSTEM
Rear guard for taillight (see the "Frame" chapter
【A】Taillight guard bolt*4
【B】Tail light shield
【C】Tail light lamp body
【D】
Tail light bolt*5
Replace
!
!
The lamps are LED lamps
The LED tail light source is damaged, only the tail light
can be replaced.
◆ Remove the bolts of the tail lamp guard *4【A】
◆
Take off the tail light shield
【
B
】
, and refer to the
installation of plastic parts for the removal method.
◆ Remove the two tail lamp mounting bolts on the side
and front cover*4
【
D
】
, and remove the tail lamp
body 【B】 after unplugging the tail lamp connector
TAIL LIGHT
D
C
A
B
To Next Page
Loading...
