EasyManua.ls Logo

Segway VILLIAN SSV Series - Replace Oil Fi Lter;Oil Strainer

Segway VILLIAN SSV Series
407 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 - 16
MAINTENANCE
Replace oil fi lter/oil strainer
Change the oil fi lter and clean the oil strainer every time
you change the oil
Change Oil Filter
The oil filter is located inside the left rear wheel of the
vehicle. Please refer to the fluid recommendation table
for capacity and plug torque. Always change the lter at
the same time as the oil change.
A
Oil Filter
Use a jack to lift the rear of the vehicle to a certain
height.
Remove the bolts under the left rear shock absorber,
and place the shock absorber tilted back aside.
Unscrew the oil fi lter with a tool, and pay attention to
the direction of the screw when unscrewing.
Install a new lter and manually rotate it clockwise
until the filter gasket touches the sealing surface
until it is tightened.
Re-fix the lower installation point of the left shock
absorber with bolt M12×1.25×7.
Clean oil strainer
B
CO-ring
Doil strainer
Torque of
Drain Plug
16-20N.m(11.8-14.8ft·lb)
Remove the drain plug, take off the O-ring, and take
out the oil strainer;
Put the oil strainer into the cleaning aid for cleaning,
and dry the cleaned strainer;
Reinstall the washed oil strainer and replace the
new O-ring when installing.
D
B C
A

Table of Contents

Related product manuals