EasyManua.ls Logo

Segway VILLIAN SSV Series - Disassemble; Fuel Pump Assembly

Segway VILLIAN SSV Series
407 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14 - 39
ELECTRICAL SYSTEM
FUEL PUMP ASSEMBLY
A
B
D
C
E
F
Disassemble
This model has two fuel tanks, the main fuel tank D and the auxiliary fuel tank E. The fuel
pump is pre-installed on the main fuel tank in advance and is located under the passenger seat;
Use the special tool F to remove the fuel pump installation screw cap B
counterclockwise;
Mark the direction of the fuel pump on the fuel tank, and remove the fuel pump A
Keep the fuel pump sealing ring C to prevent loss;
See the fuel system chapter for details;
!
After removing the fuel pump, please protect the fuel tank port eff ectively to prevent debris from falling
into the fuel tank and damage the fuel pump.
!
Whenever the gasoline pipeline is removed, the battery must be disconnected to prevent the fuel
pump from starting accidentally.
Whenever any maintenance or inspection of the fuel system is carried out, fuel leakage may
occur. There must be no welding, smoke, open fl ames,
etc. in this area.

Table of Contents

Related product manuals