Segway VILLIAN SSV Series - Brake Hose Inspection; Brake Pedal; Brake Pedal Position Adjustment; Installation of Parking Cable

11 - 11
BRAKE SYSTEM
Brake Hose Inspection
◆ Refer to the Brakes in the Periodic Maintenance
chapter.
◆
Brake Hose Replacement
◆ Refer to the Brakes in the Periodic Maintenance
chapter.
Brake Hoses
Brake Pedal Position Adjustment
◆ Loosen the locknut 【A】, and turn the adjusting bolt
【B】 until the brake pedal is correctly positioned.
◆ Tighten the locknut.
◆ Check the brake pedal free play .
BRAKE PEDAL
Parking cable removal
◆
Take the head of the parking cable
【
C
】
out of the
rotating arm【B】in the rear brake
◆ Disassemble 2 pieces of M8 nuts 【A】
◆
Remove the middle guard plate, loosen the
corresponding 2 pieces of M8 nuts【D】on the
parking cable to be dismantled, and then take the
corresponding parking cable head
【
E
】
out of the
splitter plate【F】.
Installation of parking cable
The installation of the parking cable can be completed
according to the reverse order of the above-mentioned
"parking cable removal".
PARKING CABLE
A
B
A
C
B
D E F
D