4 -
7
FRONT AXLE AND REAR GEARBOX
FRONT AXLE AND REAR GEARBOX
!
WARNING
Vehicle operation with insuffi cient,deteriorated,or contaminated
gear oil will cause accelerated wear and may result in
Gearbox Damage, accident,and injury.
Drain the old gear oil
◆
Tools: 8mm Allen key
◆
Rotate B counterclockwise and unscrew it, let it
stand for 10 minutes to let the old gear oil flow
out, then put A on the threaded end of B, tighten
it clockwise, and wipe clean the gear oil spilled
around it.
◆
Please dispose of waste gear oil in an
environmentally friendly manner, please take care
of the environment
!
CAUTION
Pay attention to check the O-ring during installation. If it is
damaged, it will lead to poor sealing and leakage of gear oil,
which will aggravate the internal wear of the gearbox and
eventually cause damage to the gearbox. Please replace the
damaged O-ring in time.
Add new gear oil
◆
Tools: 8mm Allen key
◆
Rotate C counterclockwise to unscrew it, add a
certain amount of new gear oil, and then tighten the
threaded end of sleeve A and C clockwise to wipe
clean the gear oil spilled around.
C
【
A
】
o-ring 13.8×2.5
【
B
】
screw plug m14 assembly
【
C
】
screw plug m14
A
B
A
Replacement of front axle gear oil
To Next Page
Loading...
Need help?
General
