13 - 18
VEHICLE BODY AND FRAME
Frame attachment removal
◆ Remove the bolts of the upper bracket of the rear
storage box (hex fl ange bolt 4-M6×16) and remove
the upper bracket of the rear storage box.
◆ Remove the upper mounting bolts (hex fl ange bolts
2-M10×1.25×75), lower mounting bolts (hex flange
bolts 2-M10×1.25×40) and nuts (hex flange bolts)
of the rear cargo box bracket assembly Tighten the
nut 2-M10×1.25) and remove the rear cargo box
bracket assembly. Before that, you need to remove
the plastic parts such as the rear cargo box, the air
filter, and the muffler cylinder (refer to the relevant
chapters for details)
◆ Remov e the fro nt a nd re ar m ount ing bolts
(hexagonal flange bolt 2-M10×1.25×20) and the
middle mounting bolt (hexagonal fl ange bolt M8×20)
of the left guard bar assembly, and remove the left
guard bar assembly. Also remove the right guard
bar assembly.
◆ Remove the bolts of the seat belt fixing bracket
assembly (hex flange bolt 4-M10×1.25×25) and
remove the seat belt fi xing bracket assembly. Before
this, you may need to remove the plastic parts such
as the rear cargo box, the air filter, the auxiliary
water tank components, and the seat belt (refer to
the relevant chapters for details)
To Next Page
Loading...
