13 - 19
VEHICLE BODY AND FRAME
◆ Remove the bolts of the seat mounting bracket
assembly (hex flange bolt 4-M8×40) and remove
the seat mounting bracket assembly. Before this,
you need to remove the seat, middle guard and
other plastic parts, the shifter and cable, the parking
mechanism and the pipeline fixed to the seat
mounting bracket assembly (refer to the relevant
chapters for details)
◆ Remove the installation nut (hexagonal fl ange face
lock nut 3-M8) of the co-pilot foot pedal assembly,
and remove the co-pilot foot pedal assembly.
◆ Remove the mounting bolts (hexagonal fl ange bolts
4-M8×16) of the engine lower guard plate, and
remove the engine lower guard plate.
To Next Page
Loading...
