Segway VILLIAN SSV Series - Disassemble the Starting Overrunning Clutch; Install the Starting Overrunning Clutch

STARTING SYSTEM
3-3-8
A
A
A
A
B
B
B
B
C
C
Disassemble the starting overrunning clutch
◆
Take out the starting driven gear assembly
【
A
】
from the overrunning clutch
◆
Check whether the bearing surface of the starting
driven gear and the bushing surface are worn,
check whether the bearing surface of the starting
driven gear and the bushing surface are worn and
damaged
◆
Remove 8 connecting bolts
【
B
】
to separate the
overrunning clutch from the magneto rotor
◆
Separate the one-way assembly from the fi xing seat,
and check whether the roller surface in the one-way
assembly is worn or damaged
Install the starting overrunning clutch
◆
Assemble the starting overrunning clutch
【
B
】
◆
Apply thread fastening glue to the threaded surface
of the mounting bolt
【
A
】
, assemble the starting
overrunning clutch and the magneto rotor, and
tighten the bolts
Bolt
【
A
】
9.8 N·m (1 kgf·m, 87 in•lb)