5 - 5
FUEL SYSTEM
◆ Test the pressure of the fuel pump supply port
through the pressure gauge【D】, and the test
pressure value is 330±20Kpa under the power-on
state.
!
◆ If the resistance reading shows unstable, please
clean the resistance wiper with alcohol and retest.
If it is still incorrect, please replace the fuel pump.
◆ If the fuel pump supply pressure test fails, please
replace the fuel pump.
Assembly
◆ Confi rm that the sealing ring is installed on the fuel
tank port
.
◆ Confi rm the orientation of the fuel pump and install it
on the fuel tank.
◆
Tighten the oil pump installation screw cap clockwise
Oil pump installation screw cap
75N·m
To Next Page
Loading...
