2 - 30
MAINTENANCE
Spark Plug
Model spark plug clearance
0.7-0.9mm
Removal of rear cargo bed
The cargo bed is a snap-in quick-release structure. Hold
the groove on the top of the cargo bed with both hands
and move it backward to remove it.
Remove the rear Cargo Bed
Loosen the M6×35 bolts fixing the air filter housing
assembly with a tool, and remove the bolts and bushings.
At this time, the air filter housing assembly and the air
filter inlet pipe joint can be turned up backwards, the
spark plug is located below, and the spark plug can be
replaced.
Spark plug inspection
Spark plug condition indicates engine running. Check or
change the spark plugs with reference to the maintenance
time of the periodic maintenance schedule.
!
Remove the spark plug for inspection need wear
protective gloves, or hot exhaust system and engine will
cause burns.
【A】Bolt
【B】Ignition coil
【C】Spark plug
A
B
C
D
Rear Cargo
Bed
To Next Page
Loading...
