9 - 6
FRONT & REAR SUSPENSION
Item Setting Available range
Front absorber:
• Preloading setting position of normal hydraulic
damping absorber spring (From the bottom of
the upper mounting seat to the position of the
adjusting nut)
64"
：
35mm(1.4in.)
20 ～ 45mm
(0.8 ～ 1.8in.)
72"：85mm(3.34in.)
65 ～ 95mm
(2.6
～
3.74in.)
Rear absorber：
• Preloading setting position of normal hydraulic
damping absorber spring (From the bottom of
the upper mounting seat to the position of the
adjusting nut)
64"：130mm(5.1in.)
120 ～ 150mm
(4.73 ～ 5.9in.)
72"：170mm(6.7in.)
170 ～ 210mm
(6.7 ～ 8.37in.)
High speed compression damping adjustment
(clockwise adjustment)
3 gear 1gear
～
9 gear
Low speed compression damping adjustment
(clockwise adjustment)
1 turn 0 ～ 2.5 turn
Restore damping adjustment (from clockwise
adjustment)
1 gear 1gear ～ 14 gear
gaseous tension 1Mpa
TECHNICAL PARAMETER
To Next Page
Loading...
