Segway VILLIAN SSV Series - Tyre Mounting (for Anti-Drop Rims)

10 - 13
WHEELS AND TIRES
B
A
1
9
5
3
8
2
10
6
4
7
12
11
16
15
14
13
D
B
Tyre mounting (for anti-drop rims)
【A】Rim
【B】Bracket
◆ Support the rim 【A】 on A suitable bracket【B】to
prevent the tire from slipping off .
◆ Tighten the detachable ring fastening bolts in a
cross way.
Torque of anti-drop ring screw
20N.m（2.0kgf·m，14.8ft·lb）
◆ Infl ate the tire until the rim is fi xed to the tire rim.
Maximum tire infl ation pressure (can be fi xed to rim
when cold)
Front and rear: 250 kPa (2.5 KGF /cm
2
, 36 psi)
!
Do not infl ate the tire above the maximum tire pressure.
Overinfl ated air can cause a tire to explode, potentially
causing injury and death.
【C】Rim
【D】Screw sleeve
◆
If the anti-drop ring screw sleeve
【
D
】
is damaged,
please replace the anti-drop ring screw sleeve
screw sleeve torque
22~25N.m（2.2~2.5kgf·m，16.2~18.4ft·lb）
◆
If necessary, replace rim
【
B
】
and screw sleeve
【D】 as a whole.