2 - 19
MAINTENANCE
Spark arrester
Spark eliminator prevents random sparks from entering
other vehicles parts. Regular maintenance can prevent
carbon accumulation, whereas delayed maintenance will
reduce engine performance.
!
Make sure the exhaust pipes are cool. The engine has
just stopped working and the pipes can overheat and
cause people burn.
To reduce fire hazards, ensure that there are no
combustible material in the area when removing them
from spark plugs.
Safety glasses are recommended in this procedure.
The exhaust pipe must be cleaned of accumulated
carbon periodically as follows:
【A】Pan head screw M6×12
【B】平垫圈
【C】Muffl er spark arrester
1. Remove the 6 fastening bolts on the left and right
muffl er spark arrester【A】
Torque of fastening bolts
11N.m(8ft·lb)
2. Disassemble the muffl er spark arrester
3. Use a non-synthetic brush to clean the arrester
screenr. A synthetic brush may melt if components
are warm. If necessary blow debris from the screen
with compressed air.
4. Inspect the screen for wear and damage. Replace a
worn or damaged screen.
5. Reinstall the muffler spark arrester and fastening
screws
A
B C
Left
A
B
C
Right
To Next Page
Loading...
