8 - 8
DRIVE SYSTEM
FRONT DRIVE SHAFT REMOVAL
【A】Split pin
【B】Nut
【C】Washer
【D】Bolt
【E】Wheel hub mount
◆ Park the vehicle in a horizontal position and use
a jack or support frame to support the vehicle so
that the wheels do not touch the ground, and then
remove the front tires
◆ Disassemble the split pin【A】and nut【B】,
remove the washer【C】;
Nut
【
B
】
Torque
300 N·m（30.6 kgf·m，220ft·lbs）
◆ Remove the brake caliper mounting bolt 【D】, and
remove the brake caliper;
Bolt【D】Torque
70 N·m（7.1 kgf·m，52ft·lbs）
◆ Take out the rim mount in the direction of the arrow
【E】
A
B
A
D
E
To Next Page
Loading...
