14 - 18
ELECTRICAL SYSTEM
Headlamp rear guard (see "Frame" chapter)
【A】Mounting bolt
【B】Headlamp rear guard
【
C
】
Headlamps
【D】Headlamp bolts*4
【E】High-Low beam adjustment bolt
Replace
!
◆ The lamps are LED lamps
◆ The far and near light of the LED headlights are
damaged, only the headlights can be replaced
◆ If other light sources are damaged, only the
headlights can be replaced.
◆
Remove the 4 bolts on the rear guard of the
headlight 【A】
◆ Remove headlight rear cover【B】and front
cover,side shield (refer to disassembly and assembly
of plastic parts)
◆ Remove 4 headl amp bolts【D】with tools,
disconnected the headlamp connector
【
C
】
, take
down the headlamp
◆ After replacement, adjust the far and near beam
adjustment bolt
【
E
】
to adjust the headlight beam
to the right position.
A
C
D
E
B
HEADLIGHT
To Next Page
Loading...
