Segway VILLIAN SSV Series - Clean the Oil Fi Lter Combination; Engine Oil Change; Remove the Oil Filter

ENGINE LUBRICATION SYSTEM
3-1-8
Engine oil change
◆
Please refer to the Engine Oil Replacement Chapter
in the Regular Maintenance chapter.
Remove the oil fi lter
◆
Please refer to the engine oil fi lter removal chapter
in the regular maintenance chapter to refuel the oil
fi lter
Clean the oil fi lter combination
◆
Disassemble
【
A
】
Screw plugM24
【
B
】
O-ring23×2.65
【
C
】
Oil fi lter combination
【
D
】
O-ring18×1.9
Clean the oil fi lter combination
◆
In any case,
【
C
】
should be cleaned thoroughly
after taking out
.
◆
Clean the coarse fi lter with a high fl ash point solvent to
remove particles sticking to the fi lter
.
!
WARNING
Clean the filter in a well-ventilated area, and pay
attention to no sparks or fl ames near the work area. Do
not use gasoline or other low-flammability solvents to
avoid the risk of fi re.
TIPS
◆
When cleaning rough filters, check for metal
particles that can damage the engine's interior
◆
Check the fi lter carefully for damage, holes, broken
wires, or peeling gaskets. If the fi lter is damaged,
replace with new parts
B
B
C
C
D
D
A
A