Segway VILLIAN SSV Series - Page 215

8- 5
DRIVE SYSTEM
【A】 Front right wheel assembly
【B】 Drive shaft mounting bolt
【C】 the front section of the drive shaft
◆ Removal of front right wheel Assembly 【A】;
◆ Remove the installation bolt of the drive shaft and
the front axle end 【B】 rotate the drive shaft 180°,
remove another fi xing bolt;
◆ Move the front section of the drive shaft 【C】 back
to separate from the output end of the front axle;
◆ And then the whole back exit drive shaft rear section
【C】;
A
B
C
C