Segway VILLIAN SSV Series

To Next Page

To Previous Page

4 -

FRONT AXLE AND REAR GEARBOX

Install the right gearbox combined bearing....................................................................19

Install the parking mechanism........................................................................................20

Install the bearing plate of the left box body..................................................................20

Install the countershaft assembly.......................................................................21

Assemble the rear axle output gear assembly................................................................21

Install the left box connector.........................................................................................21

Install the gear set..........................................................................................................22

Assemble the HR shift fork shaft assembly.....................................................................22

Assemble the L gear shift fork shaft assembly.......................................................22

Install the HR shift fork shaft assembly.............................................................23

Install the L gear shift fork shaft assembly..........................................................23

Install the parking shaft and shift drum assembly.................................................24

Assemble the reverse gear idler shaft assembly.............................................................24

Install the main shaft assembly.............................................................25

Install the gear assembly.....................................................................................25

Install the right box body combination...................................................................25

Install the countershaft low-speed gear..........................................................26

Install the driven bevel gear shaft.........................................................................26

Install the driven bevel gear shaft.................................................................27

Install the driven bevel gear cover oil seal.......................................................27

Install the driven bevel gear cover.........................................................................27

Install the gear sensor and rotary shaft oil seal.............................................................28

Install the gear set nut......................................................................................28

Assemble the oil pump components.....................................................................29

Install the oil pump assembly...........................................................................29

Install the rear axle output shaft oil seal..................................................................29

Install the needle bearing and locating pin.........................................................30

Install the shift mechanism............................................................................30

Install the needle bearing and locating pin...................................................30

Segway VILLIAN SSV Series - Page 157