8- 11
DRIVE SYSTEM
【A】 bolt
【B】 Slotted nut
【C】 front knuckle
【D】 bolt
【E】 Constant speed drive shaft
◆ Remove the fixed bolts of the upper and lower
kingpin 【A】, so that the upper and lower rocker
arm is separated from the steering knuckle;
◆ Remove the steering rod slotted nut 【B】, so that
the steering rod and steering knuckle separation;
Bolt [B] Torque
70 N·m（7.1 kgf·m，52ft·lbs）
◆ ◆ Remove steering knuckle in the direction of arrow
【C】;
◆ ◆ Remove the lower mounting bolt of shock
absorber 【D】;
Bolt [D] Torque
70 N·m（7.1 kgf·m，52ft·lbs）
◆ ◆ The drive shaft 【E】 placed horizontally, along
the direction of the horizontal arrow with a short and
short force, pull out the drive shaft, if not out, please
try several times;
A
B
B
C
D
E
To Next Page
Loading...
