Segway VILLIAN SSV Series - Page 37

2 - 22
MAINTENANCE
Front axle oil fi lling
【A】Filling plug
【B】
Drain Plug
【B】O-ring
Torque of
Filling Plug/Drain pulg
16-20N.m(11.8-14.8ft·lb)
1. Position the vehicle on a horizontal plane. Remove
the drain plug.
2. Place the drain tray under the demand drive unit.
Remove the drain plug【B】. Allow the fl uid to drain
completely.
3. Clean and reinstall the drain plug【B】. Torque to
desired value.
4. Add the recommended amount of liquid.
5. Reinstall the injection plug.Torque to desired value.
6. Check the leakage situation. Dispose of used liquids
properly.
Rear gearbox oil fi lling
【A】drain plug
【B】O-ring
【C】Oil dipstick
【D】O-ring
Torque of
Drain pulg
16-20N.m(11.8-14.8ft·lb)
1. Position the vehicle on a horizontal plane. Remove
the drain plug.
2. Place the drain tray under the demand drive unit.
Remove the drain plug【A】. Allow the fl uid to drain
completely.
3. Clean and reinstall the drain plug【A】. Torque to
desired value.
4. Unscrew the oil dipstick of the rear gearbox.Add the
recommended amount of liquid.
5. Re-tighten the oil dipstick of the rear gearbox.
6. Check the leakage situation. Dispose of used liquids
properly.
A
B
C
C
C
D
A
B