14 - 91
ELECTRICAL SYSTEM
◆ Remove external related plastic parts
◆ First remove the self-tapping screw【A】
◆ Unplug the plug-in【B】
◆ The winch wireless control module【C】can be
removed
Removal of winch socket
◆
After removing the external related plastic parts
◆ First remove the self-tapping screw【A】
◆ Then unplug the plug-in【B】
◆
The winch socket
【
C
】
can be removed
B
H
H
J
◆ Remove two nuts【H】with tools
◆ The motor wire【J】can be removed
◆ Cut off the wire tie, then the relay【G】can be
removed
A
C
B
C
A
To Next Page
Loading...
