14 - 94
ELECTRICAL SYSTEM
Instructions for use of winch remote control switch:
◆ Press the 2 buttons at the same time and keep it
there for 3S to activate the remote control switch, at
this time the indicator light will fl ash 3 times
◆ You can press a button to control the rotation of the
winch motor
◆ Press the 2 buttons at the same time and keep it for
3S, turn off the remote control switch, the indicator
light will go out at this time
Instructions for use of winch switch:
◆ Insert the winch switch into the winch socket, then
press the winch switch left and right, winch motor
rotation can be controlled
Instructions for manual release switch of winch:
◆ Turn the manual release switch clockwise, then
you can pull out the wire rope by hand. If you need
to retract the wire rope, you must turn the manual
release switch counterclockwise and use the switch
to control the rotation of the motor to retract the wire
rope.
Reclaim the winch cable
Release the winch cable
Winch controller switch
Winch controller socket
To Next Page
Loading...
