EFI SYSTEM
3-2-4
C
C
Remove the ignition coil
◆
Remove the two bolts
【
A
】
, pull out the ignition coil
【
B
】
Disassemble the electronic throttle valve
assembly
◆
Loosen the clamps on the intake pipes and
disassemble the electronic throttle valve assembly
Install the ignition coil
◆
Insert the ignition coil
【
B
】
into the ignition coil hole
of the cylinder head cover, and connect the spark
plug
◆
Screw in the bolt
【
A
】
and tighten it according to
the torque
◆
Tightening torque
Bolt
【
A
】
9.8 N·m (1 kgf·m, 87 in•lb)
Install the electronic throttle valve assembly
◆
Loosen the clamps on the intake pipes, align the
electronic throttle valve assembly with the intake
pipe and insert, and tighten the two intake pipe
clamps.
EFI system
A
A
B
B
To Next Page
Loading...
