CRANKCASE\CRANKSHAFT\BALANCE SHAFT
3-4-15
◆
Remove 4 through-tubing mounting bolts and
Remove 4 through-tubing mounting bolts and
remove through-tubing assembly
remove through-tubing assembly
【
D
】
.
◆
Remove 11pcs M6 bolts and 2pcs M8 bolts from the
Remove 11pcs M6 bolts and 2pcs M8 bolts from the
upper crankcase
◆
Turn the crankcase and remove the 8pcs M10 bolts,
4pcs M8 bolts and 1pcs M6 bolt on the crankcase
◆
Use a rubber hammer to gently knock around the
crankcase, the crankcase will be loosened after the
lower crankcase up.
D
To Next Page
Loading...
