Appendix 1 Parameter table
Appendix 179
Short circuit to ground protection
function when start
XX1:Detect leakage current of ground when
inverter starts
0X1:Detect leakage current of ground only
for the first startup
1X1:Detect leakage current of ground for
every startup.
Input phase loss protection
1: When input phase loss, built-in keypad
shows IPF alarm and inverter stops
GF detection level when operating
High frequency vibration
suppression factor
7.5K/11KF and above:0~1515
Choose 0~12 recorded alarm
Alarm record code display
Alarm record message query
Choose 0~10 recorded alarm
Alarm record message display
Total inverter operation time
(minutes)
Total inverter operation time
(days)
Total inverter power on time
(minutes)
Total inverter power on time (days)
Motor control mode selection
0: Induction motor V/F control
2:Induction motor simple vector control
Motor specifications automatic
measurement
1: Induction motor specifications automatic
measurement (Run motor to measure)
2: Induction motor specifications automatic
measurement (Don’t run motor to measure)
3: Induction motor specifications automatic
measurement (Measure when operating)
Motor rated rotation speed
IM Motor excitation current