Appendix 1 Parameter table
Appendix 184
Acceleration/decelerati
on curve selection
0: Linear acceleration /deceleration curve
1: S shape acceleration /deceleration curve 1
2: S shape acceleration /deceleration curve 2
3: S shape acceleration /deceleration curve 3
3.7K and below：0～360.00s/0～3600.0s
5.5K model：0～360.00s/0～3600.0s
7.5K/11KF and above model ： 0 ～ 360.00s/0 ～
3600.0s
3.7K and below：0～360.00s/0～3600.0s
5.5K~7.5K/11KF model：0～360.00s/0～3600.0s
7.5K/11KF and above model ： 0 ～ 360.00s/0 ～
3600.0s
Acceleration/decelerati
on time increments
0: Time increment is 0.01s
1: Time increment is 0.1s
Acceleration/decelerati
on reference frequency
50Hz system setting: 1.00～650.00Hz
60Hz system setting: 1.00～650.00Hz
5.5K ~7.5K/11KF model：0～30.0%
11K/15KF and above model：0～30.0%
0: For constant torque loads (conveyor belt, etc.)
1: For variable torque loads (fans and pumps, etc.)
5~13: Special two-point V/F curve
Output frequency filter
time
To Next Page
Loading...
Need help?
General
