Appendix 1 Parameter table
Appendix 185
Output voltage 1 of middle
frequency
Output voltage 2 of middle
frequency
Output voltage 3 of middle
frequency
Output voltage 4 of middle
frequency
Output voltage 5 of middle
frequency
S curve time at the beginning
of acceleration
S curve time at the end of
acceleration
S curve time at the beginning
of deceleration
S curve time at the end of
deceleration
Remote function acc/dec
time selection
0：Use default acc/dec time（same as regular
mode）
1：Use second acc/dec time
Proportional linkage gain
2: Output frequency = basic frequency + auxiliary
frequency (given by terminal 3-5)
4: Output frequency = basic frequency - auxiliary
frequency (given by terminal 3-5)
6: Output frequency = proportional linkage signal
(given by terminal 3-5)
To Next Page
Loading...
Need help?
General
