Cardiac Calculations
6-10 ACUSON Cypress™ Operator’s Manual
Saving Calculations to the Patient Report
After each measurement or sequence of measurements is completed, the
results of any calculation that uses the measurements as input are displayed.
To save the results and close the menu, click [OK].
If you are not satisfied with a specific result, you can redo the measurement
again. To keep the menu open, but clear all the results currently displayed, click
[
CLEAR]. To cancel the currently calculation and close the menu, click
[
CANCEL].
When you have completed all your calculations and are satisfied with the
results, to save the measurements (and close the Report Menu) click [
OK].
Results can be viewed at any time by activating the patient study and then click-
ing the Report tab.
To Delete a Single Measurement from a Report Menu
1. Highlight the measurement with the cursor.
2. Press the <BACKSPACE> key to remove that measurement and any associ-
ated measurements.
To Next Page
Loading...
Need help?
General
