ACUSON Cypress™ Operator’s Manual 8-11
Important Stress Controls
Deleting Unlabeled Loops from a Study
To delete unlabeled loops, follow these steps:
1. Press the PATIENT key.
2. Highlight the Date and Time of the study.
3. Click [REMOVE]
4. Select the Unflagged Images option by clicking the radio button.
5. Click [YES]
6. All unflagged images will be deleted.
NOTE: Deleted images cannot be retrieved.
Transferring Studies in a DICOM Format
Stress studies can be transferred to a DICOM compatible viewer so that the
images can be displayed in either a full-screen format or a region of interest
(
ROI) format. The full-screen format displays the entire image. The ROI format
displays only the data within the
ROI.
To setup the
DICOM stress image size, follow these steps:
1. Press the SETUP key.
2. Double-click the DICOM tab.
3. Highlight the DICOM Stress Image Size subtitle and an option menu will
appear on the right side of the screen.
4. Click the desired option.
5. Press the SETUP key to exit the menu.
To Next Page
Loading...
Need help?
General
