ACUSON Cypress™ Operator’s Manual 4-15
Adding and Editing Patients and Studies
Starting a New Study
If the patient being examined is already in the system Patient/Study list:
1. Press the PATIENT function key to display the Patient/Study list.
2. Scroll through the list by positioning the cursor on the up or down arrow and
pressing <
ENTER> or by turning the Main knob.
3. When you have found the appropriate patient, use the Trackball and
<
ENTER> key to highlight the patient name.
4. Click the [NEW STUDY] button to start a separate and new study for this
patient.
5. If desired, enter a new Height, Weight, Blood Pressure, Study Indication,
or Accession # and select the Protocol by clicking on the arrow to display
the drop-down menu and highlighting the protocol.
6. Click [OK].
7. To save the information and return to the 2D display, press 2D or SETUP.
If the patient being examined is not in the system:
See “Adding and Editing Patients and Studies” on page 4-9.
To Next Page
Loading...
