ACUSON Cypress™ Operator’s Manual 3-15
The Presets Menu
Making Changes to the Current User-Defined Preset
The [UPDATE] button lets you make changes to the currently loaded user-
defined Preset. For example, to include Sector Angle 2 in the user-defined pre-
set, make the adjustment to the Cypress and then follow these steps:
1. Press the SETUP key.
2. Highlight the Presets heading.
3. Click [UPDATE]
Reload Preset with New Patient
Presets can be reloaded each time new patient data is entered. To enable this
feature, follow these steps:
1. Press SETUP and double-click the Presets heading.
2. Highlight the Reload with New Patient option.
3. Place a checkmark in the Enabled box. The Preset is loaded when live
imaging begins.
NOTE If a Preset is removed (i.e., deleted) after [LOAD] is clicked and
before the start of live imaging, the factory default Preset will be
loaded.
To Next Page
Loading...
