Siemens ACUSON Cypress

Patients
4-6 ACUSON Cypress™ Operator’s Manual
Explanation of Patient Menu Buttons
Table 10 describes each button on the Patient tab menu screen. Note that all
the buttons are not active all the time. Only the buttons that are active are dis-
played.
TABLE 10. Patient Menu Buttons
Button Description
[
ACTIVATE/
DEACTIVATE/
RESTORE
]
Activates or opens an existing patient or study that is
highlighted (see “Adding Data to an Existing Study” on
page 4-18).
RESTORE copies studies from the MO disk
to the Cypress system hard drive. Highlight the MO disk
icon in the Patient List or highlight a group of studies in
the Study List and then click [
RESTORE] to copy the
entire MO disk to the Cypress system hard drive.
[
EDIT] Opens the patient menu for the selected patient or
study to edit existing data (see “Editing Patient and
Study Information” on page 4-16).
[
REMOVE] Removes the highlighted patient or study from the list
and the system (see “Removing a Study or Patient from
the System” on page 4-20). There are three options:
 Remove all data: removes all traces of the studies
and all patient information and reports.
 Remove all images: removes images, but leaves
patient information and reports.
 Remove all unflagged images: removes only the
unflagged images; leaves flagged images, patient
information, and reports.
[
SEND] Allows you to send studies from the Cypress ultrasound
system to an MO disk, CypressViewer, or another
Cypress system.
See “Sending the Studies” on page 9-17 for more infor-
mation.
[
NEW PATIENT] Opens the menu to add a new patient (see “Adding a
New Patient” on page 4-9).
[
NEW STUDY] Starts a new study for the selected (highlighted) patient
(see “Starting a New Study” on page 4-15).