Patients
4-14 ACUSON Cypress™ Operator’s Manual
Caching of Modality Worklist Results
The results of the Modality Worklist query are automatically saved on the sys-
tem for later use, for instance, when the system is not connected to the network.
The results are saved over power down cycles. Each subsequent query over-
writes the cache.
To use the cache, follow these steps:
1. Press the PATIENT function key.
2. Click [WORKLIST] to display the Modality Worklist Query screen. The results
of the most recent query are displayed in table form at the bottom of the
Worklist Query screen.
3. Select the desired patient by double-clicking its row, or by selecting (high-
lighting) it and clicking [
CREATE].
4. The Modality Worklist Details screen will be displayed, listing all available
information on this patient received from the Worklist Server. Use this infor-
mation to verify that the selected patient is the patient that is about to be
scanned.
5. To create a new Patient and Study for the selected patient, click [OK] on the
Modality Worklist Details screen. The Cypress system New Patient screen
will be displayed.
6. To create the Patient and Study, click [OK]. If the Cypress system already has
a patient in its database that matches the selected patient, you will be
prompted to verify this and create a new study under the existing patient.
NOTE Once the selected patient is used to create a study, its information is
removed from the cache.
To Next Page
Loading...
