Siemens ACUSON Cypress

ACUSON Cypress™ Operator’s Manual 9-11
Exporting Images from the Cypress System
DICOM Setup For Modality Worklist
If the optional networking package is installed, the DICOM Modality Worklist
Server information fields must be completely defined before the ability to make
Modality Worklist Queries is enabled.
To specify your Modality Worklist settings, follow these steps:
1. Press the SETUP function key.
2. Double-click the DICOM directory listing and complete the Server Information
detailed in steps 3-9:
3. Click the Modality Worklist Server subtitle.
4. Click the [ADD] button.
5. Identify your server by typing a user-defined name in the Server Name
Field.
6. Set the Application Entity. This defines the server application that receives
Modality Worklist queries from the Cypress system.
7. Set the IP Address. This is the IP address of the Modality Worklist Server
where the query will be made.
8. Set the Port Number. This is the remote port on the server that is to receive
the connection request. The default setting is 104.
9. The Test Result field lets you know the test result of the connection to the
Modality Worklist server. This field is used in conjunction with the [
PING] and
[
VERIFY] buttons. Before using these buttons, verify with your IT department
that your Modality Worklist server will respond to a ping and a
DICOM Verify.
Some systems will not respond to a ping due to network security issues.
Some Modality Worklist servers may not respond to a
DICOM Verify com-
mand — consult the server's
DICOM Conformance Statement. After changing
or setting up the
DICOM server settings, test the connection by clicking the
[
PING] button. The system will test the connection and indicate its results in
this field. If the ping is successful, test the
DICOM connection by clicking the
[
VERIFY] button.