Siemens ACUSON Cypress

Stress Echo
8-20 ACUSON Cypress™ Operator’s Manual
Removing a Label
To remove a label from a loop, follow these steps:
1. Display the loop in the full-screen format.
2. Turn the PROTOCOL knob until no labels are displayed.
Changing the ROI Position
To change the ROI position, follow these steps:
1. Turn the SEL QUAD knob to move the ROI box to the desired quad.
2. To display the loop in full-screen, press the VIEW key.
3. If the ROI box is not displayed, press the TOOLS key and click [ROI].
4. Use the Trackball to change the position of the ROI box.
5. To display the quad-screen, press the VIEW key.
Deleting Loops
NOTE Deleted loops cannot be recovered.
To delete loops, follow these steps:
1. Turn the SEL QUAD Soft Window knob to move the box to the desired quad.
2. To display the loop in full-screen, press the VIEW key.
3. Turn the DELETE Soft Window knob to display the confirmation window. Use
the Trackball to highlight [
NO] if you do not want to delete the loop. To delete
the loop, press <
ENTER>.
4. To return to the quad-screen display, press VIEW.
Changing a View or Stage Label
To change a view or stage label, follow these steps:
1. Turn the SEL QUAD Soft Window knob to move the box to the desired quad.
2. To display the loop in full-screen, press the VIEW key.
3. Turn the PROTOCOL Soft Window knob to display the desired stage/view
label.
4. To return to the quad-screen display, press VIEW.