Basic Setup
3-6 ACUSON Cypress™ Operator’s Manual
Trackball Speed Adjusts the speed of the Trackball. There are two
options that can be set independently:
General — For Trackball operation when not per-
forming a measurement.
Measurement — For Trackball operation when
performing a measurement.
To set the Trackball speed, use the Trackball and
<
ENTER> keys. Place the cursor on the speed marker
and then press and hold the <
ENTER> key while mov-
ing the Trackball to set the speed. Or, use the Track-
ball to position the cursor at a point within the range
scale and then press the <
ENTER> key, the speed
marker will move towards the cursor. To slow down
the Trackball, slide the bar to the left; for a faster
Trackball, slide the bar to the right.
Double-Click
Speed
Sets the speed of the double-click used throughout
the system (for example, when selecting a patient). To
slow down the double-click (i.e., allow more time
between clicks), slide the bar to the left. For faster
double-click, slide the bar to the right.
TABLE 4. Setup Menu Fields
Field Description
To Next Page
Loading...
