ACUSON Cypress™ Operator’s Manual 3-19
The Calculations Menu
Averaging When the Averaging function has been activated,
measurements that are part of the Patient Report
automatically display the averaged result when two
or more of the same measurements are completed.
Up to 20 results can be averaged. To activate Aver-
aging, put a checkmark in the Enabled box.
Report
Color — Specifies how the reports are printed;
either dark text on a light background or light text
on a dark background.
Cardiac Format — Specifies a report format for
Cardiac studies. When Complete is specified, the
entire report is displayed, including sections with-
out data. When Configured is specified, the
report displays only the sections where data has
been entered.
Vascular Format — Specifies a report format for
Vascular studies. Only the Configured format is
available; the report displays only the sections
where data has been entered.
Menu Position The default menu position for the Calcs menu is in
the upper right corner. Using this option you can
move it to one of the other corners of the screen by
selecting the corresponding radio button.
Cursor Type Select how you want the cursor to appear on the
Cypress system screen. Click the radio button for
the corresponding cursor type.
Vascular Sites Default Vascular Exam Type — Specify the default
exam type for vascular studies by selecting an exam
type from the pull-down menu and clicking the
Default radio button. See “Setting Up Default Sites
for Vascular” for more information.
TABLE 6. Calculation Menu Fields
Field Description
To Next Page
Loading...
