ACUSON Cypress™ Operator’s Manual ix
Contents
Performing General Measurements 6-7
Performing Specific Cardiac Calculations 6-9
Saving Calculations to the Patient Report 6-10
Entering A Heart Rate 6-11
Saving Frames Containing Measurement Graphics 6-12
Deleting a General Measurement 6-12
Deleting a Specific Measurement 6-12
Making Corrections to the Trace and Area Measurements 6-13
Stopping a Measurement Before Completion 6-13
Setting the Trace Resolution 6-13
Viewing the Patient Report 6-13
Changing the Position of a CALC Menu 6-14
Setting a Default Position for the CALC Menu 6-14
Cardiac Formulas and References 6-15
2D Formulas 6-15
M-Mode Formulas 6-18
Doppler Formulas 6-20
Cardiac Calculation References 6-24
CHAPTER 7 Vascular Calculations
Overview of Vascular Measurements 7-2
Types of General Vascular Measurements 7-2
Types of Specific Vascular Calculations 7-3
Vascular Calculations Setup 7-4
Setting Parameters 7-4
About Construction Methods 7-4
Selecting a Report Format 7-5
Selecting a Report Background 7-5
About Default Sites for Vascular 7-5
Adding Default Sites for Vascular 7-5
Editing Default Vascular Sites 7-6
Removing Default Vascular Sites 7-6
Restoring Factory Defaults to Vascular Sites 7-6
Changing the Position and Order of the Vascular Sites 7-6
Using the Vascular Calculations Package 7-7
Performing General Vascular Measurements 7-7
Performing Specific Vascular Calculations 7-9
Saving Calculations to the Patient Report 7-10
Saving Frames Containing Measurement Graphics 7-10
Deleting a General Measurement 7-11
Deleting a Specific Measurement 7-11
To Next Page
Loading...
