Engineering via SICAM WEB
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual Unrestricted 359
DC8-037-2.02, Edition 10.2017
This is how to define groups for the Cockpit:
• Menu Home | Alarms & Events | Event list
(further information see 9.1.10, Configuration of the Local Process Data Display (only
CP-8000))
This is how you get to the logging of signal states in SICAM WEB:
• Menu Home | Alarms & Events | Event list
(further information see 9.1.14.1, Show Event List)
• Menu Home | Alarms & Events | Alarm list
(further information see 9.1.14.2, Show Alarm List)
This is how you get to the logging of signal states on the LCD:
• Menu Monitoring | Events
(further information see 11.1.2.4.2, Events | DEF Events)
• Menu Monitoring | Alarms
(further information see 11.1.2.4.4, Alarms)
To Next Page
Loading...
Need help?
General
