Siemens FST020 - Page 87

Setup
3.4 Inputs and outputs
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
85
3.4.3.4.3 Pulse units
Description
Units of pulse duration values of Ch4 in pulse mode.
Setting
Volume: l (liters); hl (hectoliters); m³ (cubic meters); gal (US gallons); i.gal (Imperial gal-
lons); BBL31.5 (1 barrel = 31.5 US gallons); BBL31 (1 barrel = 31 US gallons); BBL42 (1
barrel = 42 US gallons); in³ (cubic inches); ft³ (cubic feet); yd³ (cubic yards); bush (bush-
els); Mass: g (grams); kg (kilograms); t (1 t = 1000 kg); STon (1 STon = 2000 lb); T (1 T =
2240 lb); oz (ounces); lb (pounds); custom units (see Custom units / Custom conversion
factor
Default
I (liters)
Related
Path
Setup → Inputs and outputs → Channel 4 - input/output → Pulse output → Pulse units
3.4.3.4.4 Custom units
Description
User specific string to define custom pulse units.
Setting
-
Default
-
Related
Path
Setup → Inputs and outputs → Channel 4 - input/output → Pulse output → Custom units
3.4.3.4.5 Custom conversion factor
Description
Conversion factor for user specific pulse values.
Setting
-
Default
-
Related
Path
Setup → Inputs and outputs → Channel 4 - input/output → Pulse outputs → Custom conver-
sion factor
3.4.3.4.6 Amount per pulse
Description
Amount of value to generate an output pulse.