Siemens SIMATIC ET 200pro - Figure 8-5: Circuit Diagram - Dse Direct Starter, Standard and High Feature

SIMATIC - ET 200pro motor starter
8-8 GWA 4NEB 950 5661-02 DS 04
Circuit diagram for direct starters DSe (ST and HF) and el. starters sDSSte / sDSte
Figure 8-5: Circuit diagram – DSe direct starter, standard and high feature
There is an exact description for:
• Motor current I
pres
in ’Present motor current’, page 10-3
• Inputs / actions in Chapter 10.7
• Emergency start in Chapter 10.12
DO 0.5 Self-test
DO 1.7 Disable quickstop
)
DI 1.6
Op. mode 'Manual operation local'
L1
I2
I3
DO 0.3
Q1
Trip reset
DI 1.0 - 1.5
Motor current I
pres
DI 0.1
Motor on / current flow
DI 0.2
Group error
DI 0.3
General warning
Auxiliary switch
Q1
DO 0.4 Emergency start
Input 1
2)
DI 0.4
Input 2
2)
DI 0.5
DO 0.0 Motor CLOCKWISE
DO 0.2 Brake
Input 3
2)
DI 0.6
Input 4
2)
DI 0.7
DI 0.0
Ready via host / PLC
Logic
Br. Br.
1)
1) Brake control only with order number ending ... AA3
L1
I2
I3
2) not present on standard
1
2
3
X3
173X246
L1
I2
I3
X1
1
2
3
PE
PE
PE.
Data bus 1L+ 1M
7
2L+ 2M