SIMATIC – ET 200pro motor starter
GWA 4NEB 950 5661-02 DS 04
4-3
4.2 Project planning
Project planning involves configuring and parameterizing the ET 200pro.
You will find more information on this in the manual 'SIMATIC ET 200pro decen-
tralized peripheral system'.
The following table shows which STEP 7 version is required for operation of the
modules.
Caution
If you are configuring the interface module IM 154-. and the ET 200pro motor
starter is not visible, your software requires an update.
For the installation, keep to the following order:
1. Install hardware updates ET 200pro IM 154-.
2. Install hardware updates ET 200pro motor starter 3RK1304...
Product inscription Order number Brief description
STEP 7-
Version
as of
RSM 3RK1304-0HS00-6AA0 Maintenance isolating module 5.3 SP2
F-RSM 3RK1304-0HS00-7AA0 Safety local maintenance isolating
module
5.3 SP2
ASM-400V 3RK1304-0HS00-8AA0 Disconnecting module 400 V 5.3 SP2
DSe ST 3RK1304-5xS40-4AA0 Direct starter, standard 5.3 SP2
DSe ST 3RK1304-5xS40-4AA3 Direct starter, standard
with brake control
5.3 SP2
DSe HF 3RK1304-5xS40-2AA0 Direct starter, high feature
with 4 inputs
5.3 SP2
DSe HF 3RK1304-5xS40-2AA3 Direct starter, high feature with brake
control and 4 inputs
5.3 SP2
RSe ST 3RK1304-5xS40-5AA0 Reversing starter, standard 5.3 SP2
RSe ST 3RK1304-5xS40-5AA3 Reversing starter, standard
with brake control
5.3 SP2
RSe HF 3RK1304-5xS40-3AA0 Reversing starter, high feature
with 4 inputs
5.3 SP2
RSe HF 3RK1304-5xS40-3AA3 Reversing starter, high feature with
brake control and 4 inputs
5.3 SP2
sDSSte / sDSte 3RK1304-5KS70-2AA0
3RK1304-5LS70-2AA0
electronic starter; high feature with 4
inputs
5.3 SP2
sDSSte / sDSte 3RK1304-5KS70-2AA3
3RK1304-5LS70-2AA3
electronic starter; high feature with
brake control and 4 inputs
5.3 SP2
sRSSte / sRSte 3RK1304-5KS70-3AA0
3RK1304-5LS70-3AA0
electronic reversing starter; high fea-
ture with 4 inputs
5.3 SP2
sRSSte / sRSte 3RK1304-5KS70-3AA3
3RK1304-5LS70-3AA3
electronic reversing starter; high fea-
ture with brake control and 4 inputs
5.3 SP2
Table 4-1: Project planning for motor starters
To Next Page
Loading...
