SIMATIC - ET 200pro motor starter
4-4 GWA 4NEB 950 5661-02 DS 04
Updating the software
To update your software via the Internet, please proceed as follows:
1. Open the STEP 7 software 'HW Config'
2. Open the menu item 'Extras' > 'Install HW updates'
3. In the screen that now appears, enable the option 'Download from the Inter-
net' (make sure that there is an active connection to the Internet)
4. In the table, cross off the required updates or click on the 'Select all' button
5. Click on 'Run'
6. The updates are installed
To Next Page
Loading...
