Siemens SIMATIC ET 200pro - Figure 10-7: Local Device Interface

SIMATIC - ET 200pro motor starter
10-40 GWA 4NEB 950 5661-02 DS 04
10.17 Local device interface
Description
The local optical device interface can be used to connect the motor starter to a
PC (accessory cable required) or a hand-held terminal. The local optical device
interface is located on the front, beneath the label.
Figure 10-7: Local device interface
Caution
To ensure uninterrupted data transfer, please make sure that the infrared inter-
face is clean.
Local optical device interface