Siemens SIMATIC ET 200pro - C.1 Standard applications

Applications
SIMATIC - ET 200pro motor starter
C-2 GWA 4NEB 950 5661-02 DS 04
C.1 Standard applications
C.1.1 With maintenance isolating module and ECOFAST connection
The following example shows a configuration with infeed via a maintenance iso-
lating module to the motor starters. A motor with ECOFAST starter is connected
at connection X2 of the maintenance isolating module.
Figure C-1: Configuration with maintenance isolating module and ECOFAST connection
Num- ber
Order number Description
1 6ES7194-4GB10-0AA0 Wide module holder, 1 m 1 6ES7154-2AA00-0AB0 Interface module IM 154-2 DP with terminating module 3 3RK1922-2BA00 Bus module 1 3RK1304-0HS00-7AA0 Maintenance isolating module RSM 1 3RK1304-5xS40-4AA0 Motor starter DSe-ST
1)
1 3RK1304-5xS40-3AA3 Motor starter RSe-HF
1)
2 3RK1922-2BQ00 Power jumper 1 3RK1902-0CK00 Sealing cap for power bus 1 3RK1911-2BEx0 Connector set for power infeed
1)
2 3RK1902-0Cx00 Connector set for motor connection
1)
1 XXX Motor with ECOFAST starter
1)
1) x = corresponding version
Interface module
Maintenance Isolating module
RSe, high feature
DSe, Standard
Wide module holder (for motor starters)
Terminating module
ON
OFF
O