Siemens SIMATIC ET 200pro - Without Maintenance Isolating Module; Figure C-2: Configuration Without Maintenance Isolating Module

Applications
SIMATIC - ET 200pro motor starter
C-4 GWA 4NEB 950 5661-02 DS 04
C.1.2 Without maintenance isolating module
The following example shows a configuration with direct infeed to the motor
starters. There is short-circuit protection of the configuration outside the
ET 200pro.
Figure C-2: Configuration without maintenance isolating module
Num- ber
Order number Description
1 6ES7194-4GB10-0AA0 Wide module holder, 1 m 1 6ES7154-2AA00-0AB0 Interface module IM 154-2 DP with terminating module 3 3RK1922-2BA00 Bus module 1 3RK1304-5xS40-4AA0 Motor starter DSe-ST
1)
1 3RK1304-5xS40-2AA0 Motor starter DSe-HF
1)
1 3RK1304-5xS40-3AA3 Motor starter RSe-HF
1)
2 3RK1922-2BQ00 Power jumper 1 3RK1902-0CK00 Sealing cap for power bus 1 3RK1911-2BEx0 Connector set for power infeed
1)
3 3RK1902-0Cx00 Connector set for motor connection
1)
1) x = corresponding version
Interface module
DSe, Standard
RSe, high feature
DSe, high feature
Wide module holder (for motor starters)
Terminating module