SIMATIC - ET 200pro motor starter
8-2 GWA 4NEB 950 5661-02 DS 04
8.1.2 Electronic starters
The electronic starters ET 200pro are offered as directly (sDSSte / sDSte) and
reversing starters (sRSSte / sRSte) in the high feature version with the following
equipment.
• 4 digital inputs
• with soft start-up and soft run-down function
• with deactivated soft start function as electronic starters for applications with
high switching frequency
• optionally with activation for externally supplied brake with 400 V
• with extended parameterization options
The following table contains an overview of the various properties of the motor
starters.
Feature
Standard DSe, RSe
motor
starters
Electronic start-
ers
Installation width [mm] 110
for power outputs up to [kW] at AC 400 V 5.5
Integrated switchgears SIRIUS contactor S00 Reversing con-
tactor and bypass
relay
Short-circuit protection through fixed, built-in
fusible links
Ye s
Parameterizable electronic overload protec-
tion
Ye s
Switching function of main and auxiliary con-
tacts
mechanical electronic
Rated operating current 0.15 - 2.0 / 1.5 - 12 A
Rated operating voltage AC 400 V
Parameterizable Yes
Tripping class CLASS 10 (fixed) 5, 10, 15, 20
Asymmetry detection Yes
Residual current detection Yes
Parameterizable current limits No Yes
Blocking protection function with quick stop No Yes
Allocation type complying with IEC 947-4-1 1
4 digital inputs No Yes
Variant without / with brake function Yes
Can software 'Motor Starter ES' be used? Yes
Derating in the upper power output range? Yes (as of t
u
= 40°C) Yes (as of t
u
=
40°C)
Diagnosis, error types, see Chapter 4.4
Table 8-1: Overview of motor starters
To Next Page
Loading...
